DS31 piezoelectric non-contact jet dispensing valve
Characteristics and advantages
1. Suitable for spraying various fluids and can be applied in dispensing operations such as UV, epoxy, encapsulation adhesive, thermal conductive adhesive, conductive adhesive, red adhesive, etc;
2. The minimum dispensing point diameter is 0.1mm;
3. Fast speed, dispensing frequency can reach 500Hz, avoiding the Z-axis movement of traditional dispensing during spraying;
4. Flexibility, can be matched with any dispensing platform in the market.
DS31 piezoelectric non-contact jet dispensing structure parameters
|
Dimensions (length * width * height)
|
90mm*40mm*100mm |
|
Material of contact liquid agent |
Stainless steel 303, special steel |
|
Liquid inlet size |
Ruhr connector, hook and loop connector |
|
Firing pin component |
High wear-resistant material |
|
Nozzle assembly |
High wear-resistant material φ0.05-φ0.3mm |
|
Heating assembly |
20-160℃ |
|
Fluid sealing ring |
High temperature resistant material |
|
Maintenance cycle of sealing components |
20，000，000次 |
DS31 Performance parameters of piezoelectric non-contact jet dispensing
|
Maximum dispensing frequency |
1000Hz |
|
Maximum driving voltage |
100% |
|
Applicable adhesive type |
Adhesives, lubricants, water solvents, molten polymers, etc |
|
Applicable viscosity range |
0~200000cps |
|
Liquid agent temperature range |
20-160℃ |
